Jumping to AARCH64 kernel via monitor[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Linux version 4.4.60 (root@CNXMDNIOUB01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 RAX120-V1.0.1.116+r49254) ) #1 SMP PREEMPT Thu Jun 18 19:52:00 CST 2020[ 0.000000] Boot CPU: AArch64 Processor [410fd034][ 0.000000] Ignoring memory range 0x40000000 - 0x41000000[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.0 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4f000 s21248 r8192 d32000 u61440[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: enabling workaround for ARM erratum 845719[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 229288[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 swiotlb=1[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)[ 0.000000] software IO TLB [mem 0x7fe07000-0x7fe47000] (0MB) mapped at [ffffffc03ee07000-ffffffc03ee46fff][ 0.000000] Memory: 902096K/931712K available (6582K kernel code, 696K rwdata, 2700K rodata, 248K init, 330K bss, 29616K reserved, 0K cma-reserved)[ 0.000000] Virtual kernel memory layout:[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)[ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc1000000 ( 15 MB actual)[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB)[ 0.000000] .init : 0xffffffc000993000 - 0xffffffc0009d1000 ( 248 KB)[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000992ab4 ( 9291 KB)[ 0.000000] .data : 0xffffffc0009e0000 - 0xffffffc000a8e200 ( 697 KB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000] Build-time adjustment of leaf fanout to 64.[ 0.000000] NR_IRQS:64 nr_irqs:64 0[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns[ 0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)[ 0.000244] pid_max: default: 32768 minimum: 301[ 0.000301] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)[ 0.000306] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)[ 0.000645] Initializing cgroup subsys io[ 0.000657] Initializing cgroup subsys devices[ 0.000664] Initializing cgroup subsys freezer[ 0.000671] Initializing cgroup subsys net_cls[ 0.000676] Initializing cgroup subsys pids[ 0.000845] EFI services will not be available.[ 0.000861] ASID allocator initialised with 65536 entries[ 0.051368] MSM Memory Dump base table set up[ 0.051384] MSM Memory Dump apps data table set up[ 0.090106] Detected VIPT I-cache on CPU1[ 0.090136] CPU1: Booted secondary processor [410fd034][ 0.120083] Detected VIPT I-cache on CPU2[ 0.120097] CPU2: Booted secondary processor [410fd034][ 0.150096] Detected VIPT I-cache on CPU3[ 0.150109] CPU3: Booted secondary processor [410fd034][ 0.150136] Brought up 4 CPUs[ 0.150150] SMP: Total of 4 processors activated.[ 0.150156] CPU: All CPU(s) started at EL1[ 0.150171] alternatives: patching kernel code[ 0.159007] DMI not present or invalid.[ 0.159154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.159169] futex hash table entries: 1024 (order: 5, 131072 bytes)[ 0.159394] pinctrl core: initialized pinctrl subsystem[ 0.159926] NET: Registered protocol family 16[ 0.160033] ramoops: using module parameters[ 0.160115] pstore: Registered ramoops as persistent store backend[ 0.160121] ramoops: attached 0x20000@0x50b00000, ecc: 0/0[ 0.190026] cpuidle: using governor ladder[ 0.220034] cpuidle: using governor menu[ 0.220102] vdso: 2 pages (1 code @ ffffffc0009e5000, 1 data @ ffffffc0009e4000)[ 0.220119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.220195] DMA: preallocated 256 KiB pool for atomic allocations[ 0.220251] CPU: IPQ8074, SoC Version: 1.2[ 0.220271] glink_init: IPC Logging Disabled[ 0.220455] IPC logging disabled[ 0.220458] IPC logging disabled[ 0.220460] IPC logging disabled[ 0.220463] IPC logging disabled[ 0.220465] IPC logging disabled[ 0.227967] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ![ 0.230271] glink_core_register_transport: IPC Logging disabled[ 0.230307] glink_core_link_up glink is up[ 0.230933] sps:sps is ready.[ 0.261270] dmi: Firmware registration failed.[ 0.262048] Advanced Linux Sound Architecture Driver Initialized.[ 0.262419] clocksource: Switched to clocksource arch_sys_counter[ 0.262594] FS-Cache: Loaded[ 0.264171] NET: Registered protocol family 2[ 0.264238] create ipmac proc[ 0.264576] TCP established hash table entries: 8192 (order: 4, 65536 bytes)[ 0.264630] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)[ 0.264724] TCP: Hash tables configured (established 8192 bind 8192)[ 0.264763] UDP hash table entries: 512 (order: 2, 16384 bytes)[ 0.264781] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)[ 0.264889] NET: Registered protocol family 1[ 0.265027] RPC: Registered named UNIX socket transport module.[ 0.265031] RPC: Registered udp transport module.[ 0.265034] RPC: Registered tcp transport module.[ 0.265037] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.265549] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available[ 0.270605] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.271445] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).[ 0.271820] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.272102] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.[ 0.272165] fuse init (API version 7.23)[ 0.272347] SGI XFS with ACLs, security attributes, realtime, no debug enabled[ 0.274690] Key type asymmetric registered[ 0.274700] Asymmetric key parser 'x509' registered[ 0.274720] io scheduler noop registered[ 0.274727] io scheduler deadline registered (default)[ 0.275769] Turn Off All LED[ 0.276190] 20000000.pci supply vdda not found, using dummy regulator[ 0.276226] 20000000.pci supply vdda_phy not found, using dummy regulator[ 0.276250] 20000000.pci supply vdda_refclk not found, using dummy regulator[ 0.276430] PCI host bridge /soc/pci@20000000 ranges:[ 0.276447] IO 0x20200000..0x202fffff -> 0x20200000[ 0.276456] MEM 0x20300000..0x20ffffff -> 0x20300000[ 1.302444] qcom-pcie 20000000.pci: phy link never came up[ 1.303971] qcom-pcie 20000000.pci: hostinit failed[ 1.303976] qcom-pcie 20000000.pci: cannot initialize host[ 1.304077] qcom-pcie: probe of 20000000.pci failed with error -110[ 1.304212] 10000000.pci supply vdda not found, using dummy regulator[ 1.304238] 10000000.pci supply vdda_phy not found, using dummy regulator[ 1.304257] 10000000.pci supply vdda_refclk not found, using dummy regulator[ 1.304429] PCI host bridge /soc/pci@10000000 ranges:[ 1.304443] IO 0x10200000..0x102fffff -> 0x10200000[ 1.304450] MEM 0x10300000..0x10ffffff -> 0x10300000[ 2.339420] qcom-pcie 10000000.pci: phy link never came up[ 2.340943] qcom-pcie 10000000.pci: hostinit failed[ 2.340948] qcom-pcie 10000000.pci: cannot initialize host[ 2.341009] qcom-pcie: probe of 10000000.pci failed with error -110[ 2.341267] MDSS QPIC HW Base phy_Address=0x7980000 virt=0x4c0000[ 2.341489] mdss_qpic_panel_probe: Panel Name = qpic lcd panel[ 2.342329] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully![ 2.345036] NET: Registered protocol family 27[ 2.345045] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled[ 2.345053] qmi_log_init: IPC Logging disabled[ 2.345056] qmi_log_init: IPC Logging disabled[ 2.345105] msm_rpm_log_probe: OK[ 2.345635] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set[ 2.346033] msm_serial 78b3000.serial: msm_serial: detected port #0[ 2.346057] msm_serial 78b3000.serial: uartclk = 3686400[ 2.346085] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM[ 2.346102] msm_serial: console setup on port #0[ 3.182703] console [ttyMSM0] enabled[ 3.187553] msm_serial 78b1000.serial: msm_serial: detected port #1[ 3.190956] msm_serial 78b1000.serial: uartclk = 19200000[ 3.197038] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM[ 3.202765] msm_serial: driver initialized[ 3.211247] msm_serial_hsl_init: driver initialized[ 3.219978] brd: module loaded[ 3.222288] loop: module loaded[ 3.223436] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64[ 4.222425] m25p80 spi32766.0: SPI transfer failed: -110[ 4.222449] spi_master spi32766: failed to transfer one message from queue[ 4.226794] m25p80 spi32766.0: error -110 reading 9f[ 4.233490] m25p80: probe of spi32766.0 failed with error -110[ 4.239333] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac[ 4.244249] nand: Winbond W29N04GZ[ 4.250744] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64[ 4.254033] 33 ofpart partitions found on MTD device qcom_nand.0[ 4.261513] Creating 33 MTD partitions on "qcom_nand.0":[ 4.267686] 0x000000000000-0x000000100000 : "0:SBL1"[ 4.274080] 0x000000100000-0x000000200000 : "0:MIBIB"[ 4.278862] 0x000000200000-0x000000280000 : "0:BOOTCONFIG"[ 4.283504] 0x000000280000-0x000000300000 : "0:BOOTCONFIG1"[ 4.288881] 0x000000300000-0x000000600000 : "0:QSEE"[ 4.295918] 0x000000600000-0x000000900000 : "0:QSEE_1"[ 4.301127] 0x000000900000-0x000000980000 : "0:DEVCFG"[ 4.304519] 0x000000980000-0x000000a00000 : "0:DEVCFG_1"[ 4.309623] 0x000000a00000-0x000000a80000 : "0:APDP"[ 4.315110] 0x000000a80000-0x000000b00000 : "0:APDP_1"[ 4.320043] 0x000000b00000-0x000000b80000 : "0:RPM"[ 4.324992] 0x000000b80000-0x000000c00000 : "0:RPM_1"[ 4.329770] 0x000000c00000-0x000000c80000 : "0:CDT"[ 4.334982] 0x000000c80000-0x000000d00000 : "0:CDT_1"[ 4.339680] 0x000000d00000-0x000000d80000 : "0:APPSBLENV"[ 4.344883] 0x000000d80000-0x000000e80000 : "0:APPSBL"[ 4.350566] 0x000000e80000-0x000000f80000 : "0:APPSBL_1"[ 4.355612] 0x000000f80000-0x000001000000 : "0:ART"[ 4.360768] 0x000001000000-0x000001080000 : "0:ART.bak"[ 4.365355] 0x000001080000-0x000001180000 : "config"[ 4.370862] 0x000001180000-0x000001280000 : "boarddata1"[ 4.376101] 0x000001280000-0x000001380000 : "boarddata2"[ 4.381379] 0x000001380000-0x000001480000 : "pot"[ 4.386693] 0x000001480000-0x000001980000 : "dnidata"[ 4.393770] 0x000001980000-0x000007d80000 : "firmware"[ 4.457390] 0x000001980000-0x000001f00000 : "kernel"[ 4.461145] 0x000001f00000-0x000007d80000 : "rootfs"[ 4.519862] mtd: device 26 (rootfs) set to be root filesystem[ 4.520177] mtd: find squashfs magic at 0x1f00000 of qcom_nand.0[ 4.524580] mtd: find squashfs magic at 0x0 of rootfs[ 4.530649] remap_blocks_in_rootfs_partition: remapped partition rootfs: 0x000001f00000-0x000007d80000[ 4.535609] create_block_mapping: create logic to physic blocks mapping for rootfs[ 4.602991] 0x000007d80000-0x000008100000 : "language"[ 4.605503] 0x000008100000-0x000008200000 : "cert"[ 4.607958] 0x000008200000-0x000008280000 : "mtdoops"[ 4.612433] 0x000008280000-0x000008480000 : "router_analytics"[ 4.618465] 0x000008480000-0x00000e880000 : "ntgrdata"[ 4.684647] 0x00000e880000-0x000020000000 : "reserved"[ 4.734211] random: nonblocking pool is initialized[ 4.857922] spmi spmi-0: PMIC Arb Version-2 (0x20010000)[ 4.859741] libphy: Fixed MDIO Bus: probed[ 5.082445] qca-mdio 90000.mdio: Could not find phy-reset-gpio[ 5.082512] libphy: qca_mdio: probed[ 5.088277] qca-mdio 90000.mdio: qca-mdio driver was registered[ 5.091039] cnss: Unable to create IPC log context![ 5.096660] cnss: Platform driver probed successfully.[ 5.101513] cnss: Platform driver probed successfully.[ 5.106697] i2c /dev entries driver[ 5.119773] sdhci: Secure Digital Host Controller Interface driver[ 5.119797] sdhci: Copyright(c) Pierre Ossman[ 5.124884] sdhci-pltfm: SDHCI platform and OF driver helper[ 5.129394] sdhci_msm 7824900.sdhci: No vreg data found for vdd[ 5.135017] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io[ 5.141851] sdhci_msm 7824900.sdhci: No vmmc regulator found[ 5.146903] sdhci_msm 7824900.sdhci: No vqmmc regulator found[ 5.192460] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit[ 5.192611] sdhci_msm 7864900.sdhci: Got SD LDO GPIO #21[ 5.320507] sdhci_msm 7864900.sdhci: No vreg data found for vdd[ 5.320527] sdhci_msm 7864900.sdhci: No vreg data found for vdd-io[ 5.335959] pmd9655_ldo11: supplied by e-smps1-reg[ 5.336043] sdhci_msm 7864900.sdhci: No vmmc regulator found[ 5.382477] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit[ 5.383712] [ 5.383712] Version Rollback Feature Disabled[ 5.389834] SPMI VADC - Min ch: 0 Max ch: 15[ 5.396454] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000[ 5.399473] coresight-csr 6001000.csr: CSR initialized[ 5.406909] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000[ 5.411845] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000[ 5.419398] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000[ 5.426770] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000[ 5.434149] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000[ 5.441520] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000[ 5.448906] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000[ 5.456285] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000[ 5.463662] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000[ 5.471034] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000[ 5.478425] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000[ 5.485797] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000[ 5.493180] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000[ 5.500547] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000[ 5.507936] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000[ 5.515312] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000[ 5.522695] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000[ 5.530189] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000[ 5.537523] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000[ 5.544917] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000[ 5.552314] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000[ 5.559684] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000[ 5.566888] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000[ 5.585058] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000[ 5.599871] sps:BAM 0x0000000006044000 is registered.[ 5.607378] coresight-tmc 6028000.tmc: TMC initialized[ 5.612160] coresight-tmc 6027000.tmc: TMC initialized[ 5.617327] coresight-funnel 6021000.funnel: FUNNEL initialized[ 5.622384] coresight-funnel 6100000.funnel: FUNNEL initialized[ 5.628208] coresight-funnel 6120000.funnel: FUNNEL initialized[ 5.634114] coresight-funnel 61a1000.funnel: FUNNEL initialized[ 5.640364] coresight-etm4x 619c000.etm: ETM 4.0 initialized[ 5.646105] coresight-etm4x 619d000.etm: ETM 4.0 initialized[ 5.652011] coresight-etm4x 619e000.etm: ETM 4.0 initialized[ 5.657687] coresight-etm4x 619f000.etm: ETM 4.0 initialized[ 5.663121] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized[ 5.668815] coresight-stm 6002000.stm: STM initialized[ 5.677062] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000[ 5.681339] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized[ 5.689942] ipq_audio soc:sound@0: ASoC: CPU DAI qca-i2s-dai not registered[ 5.696580] ipq_audio soc:sound@0: snd_soc_register_card() failed:-517[ 5.704541] qca_codec 0-0012: i2c regmap done[ 5.710537] Netfilter messages via NETLINK v0.30.[ 5.714328] nf_conntrack version 0.5.0 (7047 buckets, 28188 max)[ 5.719465] ip_tables: (C) 2000-2006 Netfilter Core Team[ 5.725493] NET: Registered protocol family 10[ 5.731139] NET: Registered protocol family 17[ 5.734629] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.[ 5.739051] Bridge firewalling registered[ 5.751778] 8021q: 802.1Q VLAN Support v1.8[ 5.755702] Key type dns_resolver registered[ 5.760668] glink_core_register_transport: IPC Logging disabled[ 5.764257] msm_glink_smem_native_xprtrx fifo not found[ 5.770661] pmd9655_s3: supplied by e-smps1-reg[ 5.776111] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0[ 5.780245] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 3[ 5.786862] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0[ 5.794513] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable[ 5.801985] cpr3_mem_acc_init: apc: not using memory accelerator regulator[ 5.811155] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 752000 uV[ 5.818103] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 864000 uV[ 5.828086] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 936000 uV[ 5.837896] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1024000 uV[ 5.847730] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 668, quot_offset[ 7]= 0[ 5.857516] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 863, quot_offset[ 7]= 195[ 5.868366] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 975, quot_offset[ 7]= 110[ 5.879306] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1120, quot_offset[ 7]= 145[ 5.890314] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop[ 5.901545] pmd9655_s4: supplied by e-smps1-reg[ 5.908017] cpr3_mem_acc_init: npu: not using memory accelerator regulator[ 5.912277] npu_corner: fused NOM: open-loop= 840000 uV[ 5.919226] npu_corner: fused TURBO: open-loop= 912000 uV[ 5.926887] ipq_audio soc:sound@0: qca-i2s-codec-dai qca-i2s-dai mapping ok[ 5.931159] ipq_audio soc:sound@0: qca-tdm-codec-dai qca-tdm-dai mapping ok[ 5.953224] hctosys: unable to open rtc device (rtc0)[ 5.958779] ALSA device list:[ 5.958798] #0: ipq8074_snd_card[ 5.962372] VFS: Mounted root (squashfs filesystem) readonly on device 31:26.[ 5.964170] Freeing unused kernel memory: 248K (ffffffc000993000 - ffffffc0009d1000)[ 5.971235] Freeing alternatives memory: 44K (ffffffc0009d1000 - ffffffc0009dc000)[ 6.223078] init: Console is alive[ 6.223171] init: - watchdog -[ 7.023605] usbcore: registered new interface driver usbfs[ 7.023647] usbcore: registered new interface driver hub[ 7.028018] usbcore: registered new device driver usb[ 7.034330] Button Hotplug driver version 0.4.1[ 7.040746] SCSI subsystem initialized[ 7.046926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 7.047206] ehci-platform: EHCI generic platform driver[ 7.059055] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy[ 7.065854] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout[ 7.065874] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868[ 7.272746] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy[ 7.280154] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout[ 7.280174] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868[ 7.488167] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller[ 7.488200] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1[ 7.492722] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010[ 7.500116] xhci-hcd xhci-hcd.0.auto: irq 245, io mem 0x08a00000[ 7.509065] hub 1-0:1.0: USB hub found[ 7.515034] hub 1-0:1.0: 1 port detected[ 7.518720] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller[ 7.522681] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2[ 7.527979] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.[ 7.535713] hub 2-0:1.0: USB hub found[ 7.543848] hub 2-0:1.0: 1 port detected[ 7.547541] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller[ 7.551479] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3[ 7.556897] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010[ 7.564354] xhci-hcd xhci-hcd.1.auto: irq 246, io mem 0x08c00000[ 7.573210] hub 3-0:1.0: USB hub found[ 7.579259] hub 3-0:1.0: 1 port detected[ 7.582922] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller[ 7.586894] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4[ 7.592215] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.[ 7.599935] hub 4-0:1.0: USB hub found[ 7.608082] hub 4-0:1.0: 1 port detected[ 8.225775] init: - preinit -Press the [f] key and hit [enter] to enter failsafe modePress the [1], [2], [3] or [4] key and hit [enter] to select the debug levelBefore mount_rootInfo: init ubi volumes on ntgrdata raw partition[ 10.372501] ubi0: attaching mtd31[ 10.760763] ubi0: scanning is finished[ 10.767032] ubi0: attached mtd31 (name "ntgrdata", size 100 MiB)[ 10.767055] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes[ 10.772095] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048[ 10.778787] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096[ 10.785643] ubi0: good PEBs: 800, bad PEBs: 0, corrupted PEBs: 0[ 10.792406] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128[ 10.798664] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 856308182[ 10.805699] ubi0: available PEBs: 89, total reserved PEBs: 711, PEBs reserved for bad PEB handling: 80[ 10.814648] ubi0: background thread "ubi_bgt0d" started, PID 209UBI device number 0, total 800 LEBs (101580800 bytes, 96.9 MiB),[ 10.832022] ubi1: attaching mtd23 available 89 LEBs (11300864 bytes, 10.8 MiB), LEB size 126976 bytes (124.0 KiB)Info: attach ubi device on ntgrdata success!Info: init ubi volumes on dnidata raw partition[ 10.855062] ubi1: scanning is finished[ 10.859589] ubi1 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 24, need 80[ 10.860060] ubi1: attached mtd23 (name "dnidata", size 5 MiB)[ 10.868831] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes[ 10.874729] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048[ 10.881488] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096[ 10.888349] ubi1: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0[ 10.895120] ubi1: user volume: 4, internal volumes: 1, max. volumes count: 128[ 10.901020] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1588836612[ 10.908321] ubi1: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 24[ 10.917615] ubi1: background thread "ubi_bgt1d" started, PID 223UBI device number 1, total 40 LEBs (5079040 bytes, 4.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)Info: attach ubi device on dnidata success!libubi: error!: cannot get information about "/dev/ubi0" error 2 (No such file or directory)ubinfo: error!: error while probing "/dev/ubi0" error 2 (No such file or directory)libubi: error!: cannot get information about "/dev/ubi0" error 2 (No such file or directory)ubimkvol: error!: error while probing "/dev/ubi0" error 2 (No such file or directory)libubi: error!: cannot get information about "/dev/ubi0" error 2 (No such file or directory)ubinfo: error!: error while probing "/dev/ubi0" error 2 (No such file or directory)libubi: error!: cannot get information about "/dev/ubi0" error 2 (No such file or directory)ubimkvol: error!: error while probing "/dev/ubi0" error 2 (No such file or directory)After mount_root131072+0 records in131072+0 records out131072 bytes (128.0KB) copied, 0.229944 se[ 11.185668] procd: - early -[ 11.187176] procd: - watchdog -conds, 556.7KB/s[ 11.786328] procd: - ubus -[ 12.789176] procd: - init -Please press Enter to activate this console.sort: standard output: Broken pipeThu Jun 18 11:54:20 GMT 2020ln: /sbin/rmmod: File existsLoading data from /dev/mtd19 ...Done!The data center is Running ...[ 13.507979] jnl: driver (UFSD_HEAD UFSD_HEAD_r331462_b361) loaded at ffffffbffc136000[ 13.560250] ufsd: module license 'Commercial product' taints kernel.[ 13.560277] Disabling lock debugging due to kernel taint[ 13.567366] ufsd: driver (UFSD_HEAD UFSD_HEAD_r331462_b361, acl, ioctl, sd2(5), tr, car) loaded at ffffffbffc144000[ 13.567366] NTFSJ support included[ 13.567366] Build_for__Netgear_AX6000_k4.4.60_2017-11-21_UFSD_HEAD_r331462_b361[ 13.570987] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k[ 13.593344] ufsd: Kernel .config hash: original 0x86aed0ce, current 0x6dd3d33e, not matched.[ 13.596312] ufsd: Kernel .config hash: original 0x86aed0ce, current 0x6dd3d33e, not matched[ 15.750785] NET: Registered protocol family 38[ 15.753116] pct2075 init![ 15.754106] get i2c adapter 0 ok[ 15.756859] get i2c client pct2075 @ 0x48 ok[ 15.760133] pct2075 probe[ 15.764410] pct2075 init success![ 15.770273] cfg80211: World regulatory domain updated:[ 15.770297] cfg80211: DFS Master region: unset[ 15.775231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)[ 15.777359] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com[ 15.780022] ntfs: driver 2.1.32 [Flags: R/O MODULE].[ 15.783225] Initializing XFRM netlink socket[ 15.783693] NET: Registered protocol family 15[ 15.798492] ssdk_switch_device_num_init[842]:INFO:ess-switch dts node number: 1[ 15.798545] ssdk_dt_get_switch_node[737]:INFO:ess-switch DT exist![ 15.798553] ssdk_dt_parse_access_mode[638]:INFO:switch_access_mode: local bus[ 15.798555] ssdk_dt_parse_access_mode[651]:INFO:switchreg_base_addr: 0x3a000000[ 15.798557] ssdk_dt_parse_access_mode[652]:INFO:switchreg_size: 0x1000000[ 15.798559] ssdk_dt_parse_mac_mode[213]:INFO:mac mode = 0x0[ 15.798562] ssdk_dt_parse_mac_mode[222]:INFO:mac mode1 = 0xff[ 15.798564] ssdk_dt_parse_mac_mode[231]:INFO:mac mode2 = 0xd[ 15.798566] ssdk_dt_parse_phy_info[483]:INFO:qcom,port_phyinfo DT doesn't exist![ 15.798572] ssdk_dt_parse_mdio[524]:INFO:mdio DT exist![ 15.798587] ssdk_dt_parse_uniphy[250]:INFO:ess-uniphy DT exist![ 15.798674] ssdk_dt_parse_intf_mac[584]:INFO:dp1 MAC bc:a5:11:a7:ae:f6[ 15.798693] ssdk_dt_parse_intf_mac[584]:INFO:dp2 MAC bc:a5:11:a7:ae:f7[ 15.798714] ssdk_dt_parse_intf_mac[584]:INFO:dp3 MAC bc:a5:11:a7:ae:f8[ 15.798769] ssdk_dt_parse_intf_mac[584]:INFO:dp6 MAC 32:31:36:37:55:31[ 15.798782] ssdk_plat_init start[ 15.874735] ssdk_ppe_clock_init[463]:INFO:ppe and uniphy clock init successfully![ 15.874935] ssdk_probe[1861]:INFO:ess_rst doesn't exist![ 15.918181] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)[ 15.923570] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)[ 15.931288] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)[ 15.940667] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)[ 15.948655] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)[ 15.958379] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)[ 15.967836] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)[ 15.975909] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)[ 15.984363] HPPE initializing...[ 15.992162] malibu_phy_api_ops_init[2827]:INFO:qca probe malibu phy driver succeeded![ 16.002657] aquantia_phy_api_ops_init[2169]:INFO:qca probe aquantia phy driver succeeded![ 16.007618] regi_init[3277]:INFO:Initializing HPPE!![ 16.232420] ssdk_ppe_reset_init[728]:INFO:ppe reset successfully![ 16.238192] qca_hppe_tdm_hw_init[453]:INFO:tdm setup num=96[ 17.784592] ssdk_switch_register[1606]:INFO:Chip version 0x1500[ 17.787577] qca_link_polling_select[1258]:INFO:link-polling-required node does not exist[ 17.793819] ssdk_switch_register[1631]:INFO:polling is selected[ 17.801540] regi_init[3281]:INFO:Initializing HPPE Done!![ 17.806448] regi_init[3321]:INFO:qca-ssdk module init succeeded![ 17.817721] tun: Universal TUN/TAP device driver, 1.6[ 17.817742] tun: (C) 1999-2004 Max Krasnyansky [ 17.824176] EDMA ver 1 hw init[ 17.828031] EDMA HW Reset completed succesfully[ 17.830884] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)[ 17.835408] RxDesc:1 (15-15) RxFill:1 (7-7)[ 17.843732] GMAC4(ffffffc03a580880) Invalid MAC@ - using 9e:fc:8a:ae:d0:cf[ 17.845591] GMAC5(ffffffc03a584880) Invalid MAC@ - using 36:57:32:41:f6:c5[ 17.853434] **********************************************************[ 17.858462] * NSS Data Plane driver[ 17.865047] **********************************************************[ 17.879953] Loading DNI-ENET driver[ 17.886580] l2tp_core: L2TP core driver, V2.0[ 17.887198] l2tp_netlink: L2TP netlink interface[ 17.914913] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2[ 17.914943] qca-nss 39000000.nss: Falling back to user helper/lib/firmware/qca-nss0.bin 33[ 18.041991] nss_driver - fw of size 804672 bytes copied to load addr: 40000000, nss_id : 0[ 18.043906] Supported Frequencies - [ 18.049134] 748.8 MHz 1.4976 GHz [ 18.055117] 1.6896 GHz [ 18.056160] [ 18.076845] qca-nss 39400000.nss: Direct firmware load for qca-nss1.bin failed with error -2[ 18.076875] qca-nss 39400000.nss: Falling back to user helper[ 18.088818] node size 2 # items 4[ 18.089980] memory: 40000000 1073741824 (avl 954359808) items 4[ 18.093303] ffffffbffc7e6e10: nss core 0 booted successfully/lib/firmware/qca-nss1.bin 33[ 18.171901] nss_driver - fw of size 343360 bytes copied to load addr: 40800000, nss_id : 1[ 18.172891] Supported Frequencies - [ 18.179045] 748.8 MHz 1.4976 GHz [ 18.185027] 1.6896 GHz [ 18.186071] [ 18.192349] sit: IPv6 over IPv4 tunneling driver[ 18.193881] node size 2 # items 4[ 18.193888] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.[ 18.195542] dni-qos module init.[ 18.195910] gre: GRE over IPv4 demultiplexor driver[ 18.196411] ip_gre: GRE over IPv4 tunneling driver[ 18.197615] ip6_gre: GRE over IPv6 tunneling driver[ 18.199484] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)[ 18.202233] QCA multicast snooping installed successfully[ 18.203073] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 18.211415] XHTTP netlink: create netlink OK.[ 18.212616] ip_set: protocol 6[ 18.227483] PPP generic driver version 2.4.2[ 18.229072] nss_lag_init[354]:LAG Manager Installed[ 18.230505] NET: Registered protocol family 24[ 18.231126] PPTP driver version 0.8.5[ 18.233152] :module loaded Build_ID - 06/18/20, 19:39:55 SoC=ipq807x_64[ 18.234020] crypto bench loaded - Build_ID - 06/18/20, 19:39:57[ 18.237971] diag: IPC Logging disabled[ 18.242810] usbcore: registered new interface driver usb-storage[ 18.257510] u32 classifier[ 18.257511] input device check on[ 18.257512] Actions configured[ 18.258357] Mirror/redirect action on[ 18.269839] arp_tables: (C) 2002 David S. Miller[ 18.274702] Ebtables v2.0 registered[ 18.276417] l2tp_ppp: PPPoL2TP kernel driver, V2.0[ 18.280647] nf_conntrack_rtsp v0.6.21 loading[ 18.284733] nf_nat_rtsp v0.6.21 loading[ 18.286359] PPP MPPE Compression module registered[ 18.291945] xt_time: kernel timezone is -0000[ 18.328751] memory: 40000000 1073741824 (avl 954662912) items 4[ 18.333196] ffffffbffc7eb710: nss core 1 booted successfully[ 19.947279] Not a bridge device, or device not found: br0[ 19.960225] Not a bridge device, or device not found: br0[ 19.962340] Not a bridge device, or device not found: br0[ 19.977964] Not a bridge device, or device not found: br0[ 19.978070] Not a bridge device, or device not found: br0sed: /etc/passwd: No such file or directorysed: /etc/shadow: No such file or directory/etc/rc.common: ./11_migrate-sysctl: line 5: cmp: not foundfind: /sys/bus/spi/devices/*/mtd: No such file or directorycfg026cb7cfg043777cfg05f087cfg06f087cfg02aa45Generating Rules...Done!wpspin:10503621ECC failed: 0ECC corrected: 0Number of bad blocks: 0Number of bbt blocks: 0Block size 131072, page size 2048, OOB size 64Dumping data starting at 0x00000000 and ending at 0x00380000...sn:67U19C5EF08BFSN: 67U19C5EF08BFlan mac: bc:a5:11:a7:ae:f6wan mac: bc:a5:11:a7:ae:f7wlan5g mac: bc:a5:11:a7:ae:f8BLUETOOTH MAC is invalid, please set in in bootloader/sbin/fan_ctrl.sh: line 40: can't create /sys/bus/i2c/devices/0-0049/fan1_target: Permission deniedCRC check good on image file (0x1174)Segment Addresses and Sizes as read from the PHY ROM image header:Primary Iram Address: 0x5400Primary Iram Size: 0x333d8Primary Dram Address: 0x38800Primary Dram Size: 0x158d0Loading IRAM: Byte: 800: Byte: 1000: Byte: 1800: Byte: 2000: Byte: 2800: Byte: 3000: Byte: 3800: Byte: 4000: Byte: 4800: Byte: 5000: Byte: 5800: Byte: 6000: Byte: 6800: Byte: 7000: Byte: 7800: Byte: 8000: Byte: 8800: Byte: 9000: Byte: 9800: Byte: A000: Byte: A800: Byte: B000: Byte: B800: Byte: C000: Byte: C800: Byte: D000: Byte: D800: Byte: E000: Byte: E800: Byte: F000: Byte: F800: Byte: 10000: Byte: 10800: Byte: 11000: Byte: 11800: Byte: 12000: Byte: 12800: Byte: 13000: Byte: 13800: Byte: 14000: Byte: 14800: Byte: 15000: Byte: 15800: Byte: 16000: Byte: 16800: Byte: 17000: Byte: 17800: Byte: 18000: Byte: 18800: Byte: 19000: Byte: 19800: Byte: 1A000: Byte: 1A800: Byte: 1B000: Byte: 1B800: Byte: 1C000: Byte: 1C800: Byte: 1D000: Byte: 1D800: Byte: 1E000: Byte: 1E800: Byte: 1F000: Byte: 1F800: Byte: 20000: Byte: 20800: Byte: 21000: Byte: 21800: Byte: 22000: Byte: 22800: Byte: 23000: Byte: 23800: Byte: 24000: Byte: 24800: Byte: 25000: Byte: 25800: Byte: 26000: Byte: 26800: Byte: 27000: Byte: 27800: Byte: 28000: Byte: 28800: Byte: 29000: Byte: 29800: Byte: 2A000: Byte: 2A800: Byte: 2B000: Byte: 2B800: Byte: 2C000: Byte: 2C800: Byte: 2D000: Byte: 2D800: Byte: 2E000: Byte: 2E800: Byte: 2F000: Byte: 2F800: Byte: 30000: Byte: 30800: Byte: 31000: Byte: 31800: Byte: 32000: Byte: 32800: Byte: 33000:CRC-16 after loading IRAM: 0x6E0FLoading DRAM: Byte: 800: Byte: 1000: Byte: 1800: Byte: 2000: Byte: 2800: Byte: 3000: Byte: 3800: Byte: 4000: Byte: 4800: Byte: 5000: Byte: 5800: Byte: 6000: Byte: 6800: Byte: 7000: Byte: 7800: Byte: 8000: Byte: 8800: Byte: 9000: Byte: 9800: Byte: A000: Byte: A800: Byte: B000: Byte: B800: Byte: C000: Byte: C800: Byte: D000: Byte: D800: Byte: E000: Byte: E800: Byte: F000: Byte: F800: Byte: 10000: Byte: 10800: Byte: 11000: Byte: 11800: Byte: 12000: Byte: 12800: Byte: 13000: Byte: 13800: Byte: 14000: Byte: 14800: Byte: 15000: Byte: 15800:0th port: Image load good - mailbox CRC-16 matches (0x6540)Image load good - mailbox CRC-16 matches SSDK Init OK!operation done.Volume ID: 3 (on ubi0)Type: dynamicAlignment: 1Size: 25 LEBs (3174400 bytes, 3.0 MiB)State: OKName: vol_ntgrcryptDCharacter device major/minor: 247:4Volume ID: 4 (on ubi0)Type: dynamicAlignment: 1Size: 5 LEBs (634880 bytes, 620.0 KiB)State: OKName: vol_ntgrcryptKCharacter device major/minor: 247:5[ 28.862384] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null)[ 31.431028] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)Success!File descriptor 9 (pipe:[3435]) leaked on lvm invocation. Parent PID 1696: /bin/sh Reading all physical volumes. This may take a while...File descriptor 9 (pipe:[3435]) leaked on lvm invocation. Parent PID 1696: /bin/shSuccessfully initialized wpa_supplicantubirmvol: volume id not specified[ 32.712196] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 1732[ 32.739452] UBIFS (ubi0:5): recovery needed[ 32.828045] UBIFS (ubi0:5): recovery completed[ 32.828125] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "vol_dal"[ 32.831414] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes[ 32.838979] UBIFS (ubi0:5): FS size: 4063232 bytes (3 MiB, 32 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)[ 32.848891] UBIFS (ubi0:5): reserved for root: 191915 bytes (187 KiB)[ 32.858752] UBIFS (ubi0:5): media format: w4/r0 (latest is w4/r0), UUID AB8EDE61-8F4E-4659-B16B-03F6ED9245DE, small LPT modelconnect error for client socket: No such file or directoryCannot initialize.Loading ArmorDebug[0] from /tmp/dal/d2dLoading ArmorStatus[0] from /tmp/dal/d2dLoading BSTResults[0] from /tmp/dal/d2dLoading BSTCfg[0] from /tmp/dal/d2dLoading DALHNotifyBST[0] from /tmp/dal/d2dLoading DALHNotifyDTN[0] from /tmp/dal/d2dLoading DALHNotifyNDN[0] from /tmp/dal/d2dLoading DeviceIdList[0] from /tmp/dal/d2dLoading DeviceIdList[1] from /tmp/dal/d2dLoading DeviceIdList[2] from /tmp/dal/d2dLoading DeviceIdList[3] from /tmp/dal/d2dLoading DeviceIdList[4] from /tmp/dal/d2dLoading DeviceIdList[5] from /tmp/dal/d2dLoading DeviceIdList[6] from /tmp/dal/d2dLoading DeviceIdList[7] from /tmp/dal/d2dLoading DeviceIdList[8] from /tmp/dal/d2dLoading DeviceIdList[9] from /tmp/dal/d2dLoading DeviceIdList[10] from /tmp/dal/d2dLoading DeviceIdList[11] from /tmp/dal/d2dLoading DeviceIdList[12] from /tmp/dal/d2dLoading DeviceIdList[13] from /tmp/dal/d2dLoading DeviceIdList[14] from /tmp/dal/d2dLoading DeviceIdList[15] from /tmp/dal/d2dLoading DeviceIdList[16] from /tmp/dal/d2dLoading DeviceIdList[17] from /tmp/dal/d2dLoading DeviceIdList[18] from /tmp/dal/d2dLoading DeviceIdList[19] from /tmp/dal/d2dLoading DeviceIdList[20] from /tmp/dal/d2dLoading DeviceIdList[21] from /tmp/dal/d2dLoading DeviceIdList[22] from /tmp/dal/d2dLoading DeviceIdList[23] from /tmp/dal/d2dLoading DeviceIdList[24] from /tmp/dal/d2dLoading DeviceIdList[25] from /tmp/dal/d2dLoading DeviceIdList[26] from /tmp/dal/d2dLoading DeviceIdList[27] from /tmp/dal/d2dLoading DeviceIdList[28] from /tmp/dal/d2dLoading DeviceIdList[29] from /tmp/dal/d2dLoading DeviceIdList[30] from /tmp/dal/d2dLoading DeviceIdList[31] from /tmp/dal/d2dLoading DeviceIdList[32] from /tmp/dal/d2dLoading DeviceIdList[33] from /tmp/dal/d2dLoading DeviceIdList[34] from /tmp/dal/d2dLoading DeviceIdList[35] from /tmp/dal/d2dLoading DeviceIdList[36] from /tmp/dal/d2dLoading DeviceIdList[37] from /tmp/dal/d2dLoading DeviceIdList[38] from /tmp/dal/d2dLoading DeviceIdList[39] from /tmp/dal/d2dLoading DeviceIdList[40] from /tmp/dal/d2dLoading DeviceIdList[41] from /tmp/dal/d2dLoading DeviceIdList[42] from /tmp/dal/d2dLoading DeviceIdList[43] from /tmp/dal/d2dLoading DeviceIdList[44] from /tmp/dal/d2dLoading DeviceIdList[45] from /tmp/dal/d2dLoading DeviceIdList[46] from /tmp/dal/d2dLoading DeviceIdList[47] from /tmp/dal/d2dLoading DeviceIdList[48] from /tmp/dal/d2dLoading DeviceIdList[49] from /tmp/dal/d2dLoading DeviceIdList[50] from /tmp/dal/d2dLoading DeviceIdList[51] from /tmp/dal/d2dLoading DeviceIdList[52] from /tmp/dal/d2dLoading DeviceIdList[53] from /tmp/dal/d2dLoading DeviceIdList[54] from /tmp/dal/d2dLoading DeviceIdList[55] from /tmp/dal/d2dLoading DeviceIdList[56] from /tmp/dal/d2dLoading DeviceIdList[57] from /tmp/dal/d2dLoading DeviceIdList[58] from /tmp/dal/d2dLoading DeviceIdList[59] from /tmp/dal/d2dLoading DeviceIdList[60] from /tmp/dal/d2dLoading DeviceIdList[61] from /tmp/dal/d2dLoading DeviceIdList[62] from /tmp/dal/d2dLoading DeviceIdList[63] from /tmp/dal/d2dLoading DeviceIdList[64] from /tmp/dal/d2dLoading DeviceIdList[65] from /tmp/dal/d2dLoading DeviceIdList[66] from /tmp/dal/d2dLoading DeviceIdList[67] from /tmp/dal/d2dLoading DeviceIdList[68] from /tmp/dal/d2dLoading DeviceIdList[69] from /tmp/dal/d2dLoading DeviceIdList[70] from /tmp/dal/d2dLoading DeviceIdList[71] from /tmp/dal/d2dLoading DeviceIdList[72] from /tmp/dal/d2dLoading DeviceIdList[73] from /tmp/dal/d2dLoading DeviceIdList[74] from /tmp/dal/d2dLoading DeviceIdList[75] from /tmp/dal/d2dLoading DeviceIdList[76] from /tmp/dal/d2dLoading DeviceIdList[77] from /tmp/dal/d2dLoading DeviceIdList[78] from /tmp/dal/d2dLoading DeviceIdList[79] from /tmp/dal/d2dLoading DeviceIdList[80] from /tmp/dal/d2dLoading DeviceIdList[81] from /tmp/dal/d2dLoading DeviceIdList[82] from /tmp/dal/d2dLoading DeviceIdList[83] from /tmp/dal/d2dLoading DeviceIdList[84] from /tmp/dal/d2dLoading DeviceIdList[85] from /tmp/dal/d2dLoading DeviceIdList[86] from /tmp/dal/d2dLoading DeviceIdList[87] froLoading DeviceIdList[192] from /tmp/dal/d2dLoading DeviceIdLisLoading Dilsignature[98] from /tmp/dal/d2dLoading Dilsignatureboot *************1737Enjoy !!!!! D2D runningstart_service *************switch init SSDK Init OK!operation done. SSDK Init OK!operation done.[ 36.207231] ECM init[ 36.207274] ECM database jhash random seed: 0x3c4dc419[ 36.209330] ECM init completedev.nss.general.redirect = 1opmode = normal[ 36.422110] bond0: Removing slave eth4[ 36.422132] bond0: option slaves: invalid value (-eth4)[ 36.424897] bond0: Removing slave eth0[ 36.429860] bond0: option slaves: invalid value (-eth0)[ 36.448967] device eth0 entered promiscuous mode[ 36.450208] device eth1 entered promiscuous mode[ 36.453852] device eth5 entered promiscuous mode[ 36.459907] device eth2 entered promiscuous mode[ 36.463008] device eth3 entered promiscuous mode[ 36.469609] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 36.472263] device eth4 entered promiscuous modekillall: acld: no process killed[ 36.562311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 36.564341] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready[ 36.568917] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready[ 36.574794] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready[ 36.580610] IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready[ 36.586546] br0: port 5(eth3) entered forwarding state[ 36.590304] br0: port 5(eth3) entered forwarding state[ 36.595438] br0: port 4(eth2) entered forwarding state[ 36.600538] br0: port 4(eth2) entered forwarding state[ 36.605667] br0: port 3(eth5) entered forwarding state[ 36.610782] br0: port 3(eth5) entered forwarding state[ 36.615909] br0: port 2(eth1) entered forwarding state[ 36.621025] br0: port 2(eth1) entered forwarding state[ 36.626154] br0: port 1(eth0) entered forwarding state[ 36.631268] br0: port 1(eth0) entered forwarding state[ 36.651919] br0: port 5(eth3) entered disabled state[ 36.651972] br0: port 4(eth2) entered disabled state[ 36.655964] br0: port 3(eth5) entered disabled state[ 36.660894] br0: port 2(eth1) entered disabled state[ 36.665849] br0: port 1(eth0) entered disabled state[ 38.356851] __mc_netlink_receive: Disable bridge snooping![ 38.372954] __mc_netlink_receive: Enable bridge snooping![ 38.387568] IPv6: ADDRCONF(NETDEV_UP): brwan: link is not ready[ 38.676206] IPv6: ADDRCONF(NETDEV_UP): br0: link is not readyDeleting static route ... Done!Adding static route ... Done![ 38.693278] clear listcheck minidlna ... /sbin/cmddlna: line 508: kwilt: not foundgrep: /tmp/etc/minidlna.conf: No such file or directory/sbin/cmddlna: line 508: kwilt: not foundudhcp server (v0.9.8) started/etc/rc.common: line 153: /etc/init.d/madwifi: not found SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done.[wlan]===time:Thu Jun 18 11:54:45 UTC 2020 command:wlan countrycode============== [wlan]===time:Thu Jun 18 11:54:46 UTC 2020 command:wlan updateconf boot============== [wlan]=========time:Thu Jun 18 11:54:46 UTC 2020 wlan updateconf start======[wlan]=========time:Thu Jun 18 11:54:47 UTC 2020 wlan updateconf end======cat: can't open '/tmp/orbi_type': No such file or directorysh: Satellite: unknown operand[wlan]===time:Thu Jun 18 11:54:47 UTC 2020 command:wlan down============== [wlan]=========time:Thu Jun 18 11:54:47 UTC 2020 wlan down start==================Save Data Success!, Parentid: 3751, parent process: (wlan),presentid: 4153,present: (config) lbd: stopping daemonCommand failed: Not found[ 41.099437] __mc_netlink_receive: Disable bridge snooping!killall: iface-mgr: no process killedkillall: acfg_tool: no process killedacfg_tool: Issuing blocking call to wait for eventslbd: stopping daemonCommand failed: Not found[ 41.202063] __mc_netlink_receive: Disable bridge snooping!killall: iface-mgr: no process killedacfg_tool: Issuing blocking call to wait for eventsqcawifi qcawificfg80211 disable radio wifi1qcawifi qcawificfg80211 disable radio wifi0/sbin/wlan: eval: line 1: can't create /sys/class/net/wifi1/led: nonexistent directory/sbin/wlan: eval: line 1: can't create /sys/class/net/wifi0/led: nonexistent directoryqcawificfg80211: Interface type not supported force_off_led functionsh: you need to specify whom to killsh: 1: unknown operandsh: you need to specify whom to killsh: 1: unknown operand[wlan]=========time:Thu Jun 18 11:54:48 UTC 2020 wlan down end==================[wlan]===time:Thu Jun 18 11:54:48 UTC 2020 command:wlan up============== [wlan]=========time:Thu Jun 18 11:54:48 UTC 2020 wlan up start==================Save Data Success!, Parentid: 4307, parent process: (wlan),presentid: 4691,present: (config) acfg_tool: Issuing blocking call to wait for eventsqcawifi qcawificfg80211: enable radio wifi1acfg_tool: Issuing blocking call to wait for events[ 42.182540] wlan (4715): drop_caches: 3rm: can't remove 'q6_fw*': No such file or directoryrm: can't remove 'fw_version.txt': No such file or directory[ 44.259109] configuring additional NSS pbufs[ 44.273404] additional pbufs of size 6000640 got added to NSS[ 44.333522] __mm_init_module [ 44.384669] qdf_dbg_mask value is invalid[ 44.384688] Using the default module debug levels instead[ 44.387648] qdf_print_ctrl_register: Allocated print control object 0[ 44.736513] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D)[ 44.746232] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved[ 44.766670] wlan: [4814: I:ANY] ath_tx99: Version 2.0[ 44.766670] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved[ 44.812694] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved[ 44.850242] ath_da_pci: (Atheros/multi-bss)*********Starting cnssdaemon and initiating cold boot calibration*************[ 45.084990] : glink SUBSYS_BEFOER_POWERUP reinit done[ 45.085051] remoteproc0: q6v5-wcss is available[ 45.089356] remoteproc0: Note: remoteproc is still under development and considered experimental.[ 45.094156] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.[ 45.121747] remoteproc0: powering up q6v5-wcss[ 45.121842] remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 796[ 45.125260] Sanity check passed for the image[ 45.979659] glink_core_link_up glink is up[ 45.979800] allocate_rx_intent rx intent id 1 allocated[ 45.982713] Subsystem error monitoring/handling services are up[ 45.982755] remoteproc0: remote processor q6v5-wcss is now up[ 45.982792] wlan: [4821: I:ANY] ol_ath_ahb_ssr: SSR event 3[ 45.999626] allocate_rx_intent rx intent id 2 allocated[ 45.999684] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled[ 46.010263] allocate_rx_intent rx intent id 3 allocated[ 46.016866] allocate_rx_intent rx intent id 4 allocated[ 46.021822] allocate_rx_intent rx intent id 5 allocated[ 46.027075] glink_xprt_open_event[ 46.032792] cnss: QMI WLFW service connected, state: 0x1[ 46.033016] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffcbe8748[ 46.033204] allocate_rx_intent rx intent id 6 allocated[ 46.033275] deallocate_rx_intent rx intent id 6 deallocated[ 46.055408] cnss: device_id : 0xffff mem mode : [0][ 46.061199] Memory for FW, va: 0x000000004be40000, pa: 0x0x000000004be40000, size: 0x3d4000[ 46.066420] cnss: BDF location : 0x000000004be00000[ 46.074432] cnss: BDF IPQ8074/bdwlan.bin size 131072[ 46.079497] cnss: BDF download response , result: 0, err: 0[ 46.084613] cnss: per device BDF location : 0x000000004be20000[ 46.089614] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000[ 46.098040] cnss: BDF download response , result: 0, err: 0[ 46.183826] wlan: [4821: I:ANY] cnss_mode: Cold boot calibration SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done.[ 46.795571] Coldboot calibration wait started[ 46.802929] allocate_rx_intent rx intent id 6 allocated[ 46.803121] deallocate_rx_intent rx intent id 6 deallocated[ 46.807284] allocate_rx_intent rx intent id 6 allocated[ 46.812736] deallocate_rx_intent rx intent id 6 deallocated[ 46.818012] allocate_rx_intent rx intent id 6 allocated[ 46.823488] deallocate_rx_intent rx intent id 6 deallocated[ 46.828779] allocate_rx_intent rx intent id 6 allocated[ 46.834376] deallocate_rx_intent rx intent id 6 deallocated[ 46.839720] deallocate_rx_intent rx intent id 6 deallocated[ 46.856869] deallocate_rx_intent rx intent id 6 deallocated[ 46.857425] deallocate_rx_intent rx intent id 6 deallocated[ 46.861769] deallocate_rx_intent rx intent id 6 deallocated[ 46.867321] deallocate_rx_intent rx intent id 6 deallocatedcat: can't open '/tmp/orbi_project': No such file or directory/etc/rc.common: line 153: can't open /tmp/device_tables/local_device_table: no such file[ 47.295965] Coldboot calibration wait ended[ 47.296770] cnss: QMI WLFW service disconnected, state: 0x9[ 47.297020] wlan: [4821: I:ANY] Coldboot calib successful: radio_id 0x65535[ 47.297985] ath_ol_pci: (Atheros/multi-bss)[ 47.302157] wlan: [4998: I:ANY] ol_ath_ahb_ssr: SSR event 0[ 47.327540] remoteproc0: stopped remote processor q6v5-wcss[ 47.327830] glink_core_link_down glink is down[ 47.332992] : glink SUBSYS_AFTER_SHUTDOWN cleanup done[ 47.382613] glink_xprt_close_event[ 47.450700] : glink SUBSYS_BEFOER_POWERUP reinit done[ 47.450779] remoteproc0: q6v5-wcss is available[ 47.455140] remoteproc0: Note: remoteproc is still under development and considered experimental.[ 47.459917] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.[ 47.468932] remoteproc0: powering up q6v5-wcss[ 47.479040] remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 796[ 47.483664] Sanity check passed for the imageRun ROUTER_BOARD net-scan config...The attached devices demo is Running ...dilapi.c: 1665: DEBUG: DIL: Total InUse MAC Address Entries are :6mkdir: can't create directory '/dev/pts': File existsmknod: /dev/ptmx: File existsmknod: /dev/pts/0: Operation not permittedmknod: /dev/pts/1: O[ 47.834400] glink_core_link_up glink is up[ 47.839353] Subsystem error monitoring/handling services are up[ 47.842722] glink_xprt_open_event[ 47.849274] remoteproc0: remote processor q6v5-wcss is now up[ 47.852865] wlan: [5017: I:ANY] ol_ath_ahb_ssr: SSR event 3[ 47.859335] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabledperation not permittedThe telnetenable is running ...device eth4 is not a slave of br0[ 47.903379] brwan: port 1(eth4) entered disabled state[ 47.910957] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 47.953006] cnss: QMI WLFW service connected, state: 0x9[ 47.953029] cnss: device_id : 0xffff mem mode : [0][ 47.959166] Memory for FW, va: 0x000000004be40000, pa: 0x0x000000004be40000, size: 0x3d4000[ 47.972699] cnss: BDF location : 0x000000004be00000[ 47.972722] cnss: BDF IPQ8074/bdwlan.bin size 131072[ 47.976650] cnss: BDF download response , result: 0, err: 0[ 47.981915] cnss: per device BDF location : 0x000000004be20000[ 47.992641] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000[ 47.994375] brwan: port 1(eth4) entered disabled state[ 47.995275] cnss: BDF download response , result: 0, err: 0[ 48.006173] dni-qos attached on eth4.[ 48.011546] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 48.044096] brwan: port 1(eth4) entered disabled state[ 48.046845] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 48.056407] brwan: port 1(eth4) entered disabled state[ 48.059178] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 48.076500] wlan: [5017: I:ANY] cnss_mode: Mission mode dev.nss.general.redirect = 0[ 48.084182] wlan: [5017: I:ANY] qca_napi_create: napi instance 0 created on pipe 4[ 48.084356] wlan: [5017: I:ANY] __ol_ath_attach(): Allocated soc ffffffc032980880[ 48.090942] btcoex_support 0 wlan_prio_gpio 0[ 48.098532] wlan: [5017: I:ANY] nss-wifili:#1 register wifili function for soc [ 48.102787] wlan: [5017: I:ANY] nss register id -1 nss config 1 Target Type 14 [ 48.109902] wlan: [5017: I:ANY] __ol_ath_attach: dev name soc0[ 48.117191] wlan: [5017: I:ANY] Skipping BMI[ 48.123157] wlan: [5017: I:ANY] ol_ath_soc_attach() WMI attached. wmi_handle ffffffc03a5dc800 [ 48.127544] wlan: [5017: I:ANY] htc_wmi_init() HT Create . ffffffc035fc0000[ 48.135918] wlan: [5017: I:ANY] htc_wmi_init() Skipping BMI Done. [ 48.142778] wlan: [5017: I:ANY] htc_wmi_init 5307 host_enable 0 nss_nwifi_offload 0[ 48.149021] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 785: AC Minfree buf allocation through module param (umac.ko)[ 48.156610] send_filled_buffers_to_user: Send Failed -3 drop_count = 1[ 48.168380] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 786: OL_ACBKMinfree : 0[ 48.174894] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 787: OL_ACBEMinfree : 0[ 48.183491] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 788: OL_ACVIMinfree : 0[ 48.191989] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 789: OL_ACVOMinfree : 0[ 48.200501] wlan: [5017: I:TIF] init_deinit_set_init_cmd_dev_params: 809: num_peers 1058, num_vdevs 17, num_tids 8540[ 48.211954] wlan: [5017: I:ANY] CDP soc attach success[ 48.219598] wlan: [5017: I:ANY] Soc attach success NSS config 3 [ 48.224675] wlan: [5017: I:ANY] htc_set_async_ep: htc_handle ffffffc035fc0000, ep 2, value 1[ 48.230824] wlan: [5017: I:ANY] htc_set_async_ep: htc_handle ffffffc035fc0000, ep 3, value 1[ 48.239546] wlan: [5000: I:ANY] SVC ready arrival: 48.237116[ 48.247630] wlan: [5000: I:ANY] SVC ready execution: 48.237131[ 48.253272] wlan: [5000: I:ANY] SVC ready time to schedule: 0.000015[ 48.259004] wlan: [5000: I:TIF] init_deinit_populate_phy_reg_cap: 334: FW wireless modes 0x7f9001[ 48.265609] wlan: [5000: I:TIF] init_deinit_service_ready_event_handler: 118: TT support 1, Wide BW Scan 1, SW cal 1[ 48.274470] wlan: [5000: I:ANY] num_rf_chain:0x00000008 [ 48.285040] wlan: [5000: I:ANY] ht_cap_info:0x0000081f [ 48.290420] wlan: [5000: I:ANY] vht_cap_info:0x738fe9fa [ 48.295807] wlan: [5000: I:ANY] vht_supp_mcs:0x0000fffa[ 48.301097] wlan: [5000: I:TIF] init_deinit_service_ready_event_handler: 154: WMI mgmt service enabled[ 48.306145] wlan: [5000: I:TIF] init_deinit_service_ready_event_handler: 173: Wait for EXT message[ 48.315524] wlan: [5000: I:ANY] SVC ext ready arrival: 48.237147[ 48.324452] wlan: [5000: I:ANY] SVC ext ready execution: 48.313111[ 48.330611] wlan: [5000: I:ANY] SVC ext ready time to schedule:0.075964[ 48.336694] wlan: [5000: I:ANY] Num chain mask tables: 3[ 48.343635] wlan: [5000: I:ANY] Dumping chain mask combo data[ 48.348927] wlan: [5000: I:ANY] table_id : 0 Num valid chainmasks: 25[ 48.354574] wlan: [5000: I:ANY] table_id : 1 Num valid chainmasks: 7[ 48.360993] wlan: [5000: I:ANY] table_id : 2 Num valid chainmasks: 8[ 48.367421] wlan: [5000: I:ANY] chain mask combo end[ 48.373757] wlan: [5000: I:TIF] init_deinit_populate_hw_mode_capability: 223: num_hw_modes 2[ 48.378708] wlan: [5000: I:TIF] init_deinit_populate_mac_phy_capability: 164: hw_mode_id 1 phy_bit_map 0x3[ 48.387136] wlan: [5000: I:TIF] init_deinit_populate_mac_phy_capability: 187: total_mac_phy_cnt 2[ 48.396593] wlan: [5000: I:TIF] init_deinit_populate_hw_mode_capability: 246: num radios is 2[ 48.405534] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1072: HE_CAP Info = 2000109[ 48.414044] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1073: Num HW modes = 2[ 48.423243] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1074: Num PHY = 2[ 48.432179] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1075: HW mode and MAC PHY CAP[ 48.440693] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1082: idx = 0 hw_mode_id = 1 pdev_id = 0 phy_id = 0[ 48.450157] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1084: 11G support = 0 [ 48.461349] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1085: 11A support = 1 [ 48.470292] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1086: 11N support = 1 [ 48.479319] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1087: 11AC support = 1 [ 48.488348] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1088: 11AX support = 1 [ 48.497374] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1090: Supported bands = 2 [ 48.506404] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1092: Ampdu density = 0[ 48.515777] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1094: Max BW supported 2G = 1 [ 48.524719] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1096: 2G - HT cap info = 381f [ 48.534441] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1098: 2G - VHT cap info = 738fe992 [ 48.544079] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1100: 2G - Supported VHT MCS =fffa [ 48.554060] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1102: 2G - HE cap = 35fc731c [ 48.564128] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1104: 2G - HE supp MCS = fffa [ 48.573852] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1106: 2G - TX chain mask = 3 [ 48.583488] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1108: 2G - RX chain mask = 3[ 48.593124] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1113: HE_CAP_PHY_INFO_2G[0] = 0 HE_CAP_PHY_INFO_2G[1]=0 HE_CAP_PHY_INFO_2G [2]=0 [ 48.602680] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1116: 2G - HE_PPET5G_NUMSS_M1 =0 HE_PPET5G_RU_MASK=0[ 48.616652] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1118: 5G - Max BW supported = 4 [ 48.628294] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1120: 5G - HT cap info = 381f [ 48.638089] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1122: 5G - VHT cap info = 738fe9fa [ 48.647554] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1124: 5G - Supported VHT MCS aaaa[ 48.657535] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1126: 5G - HE cap = 35fc7340 [ 48.667603] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1128: 5G - HE supp MCS = ffaaaaaa [ 48.677154] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1130: 5G - tx chain mask = ff[ 48.687046] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1132: 5G - RX chain mask = 255[ 48.696682] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1137: HE_CAP_PHY_INFO_5G[0] = 800c601c HE_CAP_PHY_INFO_5G[1]= 4801f02 HE_CAP_PHY_INFO_5G [2]=0[ 48.706331] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1140: 5G - HE_PPET5G_NUMSS_M1 = 7 HE_PPET5G_RU_MASK=f[ 48.721458] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1142: chain mask tableid= 0[ 48.733163] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1082: idx = 1 hw_mode_id = 1 pdev_id = 1 phy_id = 1[ 48.742343] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1084: 11G support = 1 [ 48.753806] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1085: 11A support = 0 [ 48.762742] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1086: 11N support = 1 [ 48.771763] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1087: 11AC support = 1 [ 48.780795] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1088: 11AX support = 1 [ 48.789824] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1090: Supported bands = 1 [ 48.799028] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1092: Ampdu density = 0[ 48.808230] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1094: Max BW supported 2G = 1 [ 48.817176] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1096: 2G - HT cap info = 381f [ 48.826893] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1098: 2G - VHT cap info = 738b6992 [ 48.836697] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1100: 2G - Supported VHT MCS =ffaa [ 48.846747] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1102: 2G - HE cap = 35fc73ec [ 48.856578] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1104: 2G - HE supp MCS = ffaa [ 48.866301] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1106: 2G - TX chain mask = f [ 48.875936] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1108: 2G - RX chain mask = 15[ 48.885572] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1113: HE_CAP_PHY_INFO_2G[0] = 800c6002 HE_CAP_PHY_INFO_2G[1]=4800302 HE_CAP_PHY_INFO_2G [2]=0 [ 48.895131] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1116: 2G - HE_PPET5G_NUMSS_M1 =3 HE_PPET5G_RU_MASK=3[ 48.910433] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1118: 5G - Max BW supported = 1 [ 48.922170] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1120: 5G - HT cap info = 381f [ 48.931911] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1122: 5G - VHT cap info = 738b69b2 [ 48.941229] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1124: 5G - Supported VHT MCS fffa[ 48.951200] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1126: 5G - HE cap = 35fc7410 [ 48.961276] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1128: 5G - HE supp MCS = fffefffa [ 48.970816] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1130: 5G - tx chain mask = 3[ 48.982429] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1132: 5G - RX chain mask = 3[ 48.990342] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1137: HE_CAP_PHY_INFO_5G[0] = 0 HE_CAP_PHY_INFO_5G[1]= 0 HE_CAP_PHY_INFO_5G [2]=0[ 48.999818] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1140: 5G - HE_PPET5G_NUMSS_M1 = 0 HE_PPET5G_RU_MASK=0[ 49.013790] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1142: chain mask tableid= 1[ 49.025415] wlan: [5000: I:TIF] init_deinit_print_service_ready_ex_params: 1145: Preferred HW Mode = 1 Num Radios = 2[ 49.034621] wlan: [5000: I:TIF] init_deinit_populate_phy_reg_cap: 342: num_phy_reg_cap 2[ 49.045382] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1270: Adding 11ax regulatory modes,[ 49.053540] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1273: phy_id = 0 wireless modes = f97f9001[ 49.061954] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1270: Adding 11ax regulatory modes,[ 49.071334] wlan: [5000: I:TIF] init_deinit_add_11ax_modes: 1273: phy_id = 1 wireless modes = 680680c[ 49.080018] wlan: [5000: I:ANY] Dumping chain mask combo data for table : 0[ 49.089385] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000001[ 49.096243] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000002[ 49.103883] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000004[ 49.111516] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000008[ 49.119161] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000010[ 49.126799] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000020[ 49.134437] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000040[ 49.142073] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000080[ 49.149715] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000003[ 49.157355] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x00000009[ 49.164993] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000030[ 49.172632] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x00000090[ 49.180267] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x00000090[ 49.187910] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x00000050[ 49.195551] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x000000a0[ 49.203187] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x00000011[ 49.210823] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x00000022[ 49.218466] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x00000044[ 49.226105] wlan: [5000: I:ANY] supported_flags: 0x70000018 chainmasks: 0x00000088[ 49.233743] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x00000007[ 49.241394] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x00000070[ 49.249022] wlan: [5000: I:ANY] supported_flags: 0x7000001f chainmasks: 0x0000000f[ 49.256660] wlan: [5000: I:ANY] supported_flags: 0x7000001f chainmasks: 0x000000f0[ 49.264299] wlan: [5000: I:ANY] supported_flags: 0xf000001f chainmasks: 0x00000077[ 49.271933] wlan: [5000: I:ANY] supported_flags: 0xf000001f chainmasks: 0x000000ff[ 49.279576] wlan: [5000: I:ANY] Dumping chain mask combo data for table : 1[ 49.287214] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x00000001[ 49.294160] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x00000002[ 49.301794] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x00000004[ 49.309438] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x00000008[ 49.317078] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x00000003[ 49.324716] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x00000007[ 49.332350] wlan: [5000: I:ANY] supported_flags: 0x68000003 chainmasks: 0x0000000f[ 49.339994] wlan: [5000: I:ANY] Dumping chain mask combo data for table : 2[ 49.347630] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000001[ 49.354576] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000002[ 49.362211] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000004[ 49.369854] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000008[ 49.377495] wlan: [5000: I:ANY] supported_flags: 0x70000007 chainmasks: 0x00000003[ 49.385132] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x00000009[ 49.392771] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x00000007[ 49.400405] wlan: [5000: I:ANY] supported_flags: 0xf0000007 chainmasks: 0x0000000f[ 49.408050] wlan: [5000: I:TIF] init_deinit_populate_dbr_ring_cap: 264: Num DMA Capabilities = 2[ 49.415698] wlan: [5000: I:TIF] init_deinit_derive_band_to_mac_param: 423: 5G radio -pdev_id = 0 start_freq = 4910 end_freq =6100[ 49.424724] wlan: [5000: I:TIF] init_deinit_derive_band_to_mac_param: 406: 2G radio - pdev_id = 1 start_freq = 2312 end_freq= 2732[ 49.436403] wlan: [5000: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 326: dfs_offload 1[ 49.448017] wlan: [5000: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 312: Do not allocate DFS object for 2G, pdev_id = 1net.bridge.bridge-nf-call-ip6tables = 0net.bridge.bridge-nf-ca[ 49.474757] wlan: [5000: I:TIF] init_deinit_update_pdev_tgt_info: 969: CDP PDEV ATTACH successll-iptables = 0[ 49.491148] wlan: [5000: I:TIF] init_deinit_update_pdev_tgt_info: 969: CDP PDEV ATTACH success[ 49.591506] wlan: [5000: I:TIF] init_deinit_prepare_send_init_cmd: 473: FW version 0x30c0e14 [ 49.591535] wlan: [5000: I:TIF] init_deinit_prepare_send_init_cmd: 477: 0x2758be4c[ 49.599017] wlan: [5000: I:ANY] copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0[ 49.836192] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter[ 49.842258] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter[ 49.842470] wlan: [5000: I:ANY] WMI ready arrival: 49.840043[ 49.848719] wlan: [5000: I:ANY] WMI ready execution: 49.840056[ 49.854454] wlan: [5000: I:ANY] WMI ready time to schedule: 0.000013[ 49.860181] wlan: [5000: I:ANY] dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112[ 49.866823] wlan: [5000: I:ANY] ast hash_elems: 16384, max_ast_idx: 4112[ 49.875403] wlan: [5000: I:ANY] ready_extract_init_status_tlv:0[ 49.881981] wlan: [5017: I:ANY] ol_ath_connect_htc() WMI is ready[ 49.914357] wlan: [5017: I:dfs] WLAN_DEBUG_DFS_ALWAYS : wifi_dfs_psoc_enable: 408: dfs_offload 1[ 49.914397] wlan: [5017: I:ANY] ol_ath_soc_attach() connect HTC. [ 49.922203] wlan: [5017: I:ANY] bypasswmi : 0[ 49.928228] wlan: [5017: I:ANY] 7ol_ath_lowi_wmi_event_attach: called[ 49.932555] wlan: [5017: I:ANY] 7ol_ath_phyerr_attach: called[ 49.938969] wlan: [5017: I:ANY] 7ol_ath_rtt_meas_report_attach: called[ 49.944792] wlan: [5017: I:ANY] ol_ath_soc_attach() UMAC attach . [ 49.951305] wlan: [5017: I:ANY] ath_lowi_if_netlink_init LOWI Netlink successfully created[ 49.957615] wlan: [5017: I:ANY] __ol_ath_attach: pdev_netdev name wifi0[ 49.965787] wlan: [5017: I:ANY] Skip txrx_pdev_attach_target[ 49.972286] wlan: [5017: I:ANY] BURSTING enabled by default[ 49.978251] wlan: [5017: I:ANY] ol_ath_pdev_attach interface_id 0[ 49.983500] wlan: [5017: I:ANY] phy id = 0 Modes supported[ 49.989734] wlan: [5017: I:ANY] 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1[ 49.995128] wlan: [5017: I:ANY] Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100[ 50.002774] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update[ 50.014833] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update[ 50.024033] wlan: [5017: I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case [ 50.033253] wlan: [5017: I:ANY] EXT NSS Supported[ 50.040343] wlan: [5017: I:ANY] OL Resmgr Init-ed[ 50.045210] wlan: [5017: I:ANY] acfg_attach: 3187: Netlink socket created:ffffffc03bcee800[ 50.049812] wlan: [5017: I:ANY] rate power table override is only supported for AR98XX[ 50.057973] wlan: [5017: I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1[ 50.066503] wlan: [5017: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 25[ 50.072731] wlan: [5017: I:ANY] [ 50.080371] wlan: [0: I:ANY] ol_ath_pdev_attach: Set global_ic[1] ..ptr:ffffffbffd356590[ 50.083667] wlan: [0: I:ANY] pdev(ffffffc036b2e188) Enabling DBDC Repeater 1 [ 50.091748] wlan: [0: I:ANY] pdev(ffffffc036b2e188) is_primary 1 [ 50.091818] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 50.104857] wlan: [5017: I:ANY] Pdev = 0 Number of peers = 529[ 50.113799] wlan: [5017: I:ANY] osif_wrap_attach:485 osif wrap attached[ 50.118741] wlan: [5017: I:ANY] osif_wrap_devt_init:446 osif wrap dev table init done[ 50.125248] wlan: [5017: I:ANY] Wrap Attached: Wrap_com =ffffffc03bcee400 ic->ic_wrap_com=ffffffc03bcee400 &wrap_com->wc_devt=ffffffc03bcee400 [ 50.133248] wlan: [5017: I:ANY] __ol_ath_attach: needed_headroom reservation 60[ 50.146252] wlan: [5017: I:ANY] Enabled Fraglist bit for the radio wifi0 features 41 [ 50.153742] wlan: [5017: I:ANY] ol_ath_thermal_mitigation_attach: --[ 50.161293] wlan: [5017: I:ANY] __ol_ath_attach: pdev_netdev name wifi1[ 50.167720] wlan: [5017: I:ANY] Skip txrx_pdev_attach_target[ 50.174056] wlan: [5017: I:ANY] BURSTING enabled by default[ 50.179996] wlan: [5017: I:ANY] ol_ath_pdev_attach interface_id 1[ 50.185241] wlan: [5017: I:ANY] phy id = 1 Modes supported[ 50.191470] wlan: [5017: I:ANY] 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1[ 50.196863] wlan: [5017: I:ANY] Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0[ 50.204511] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update[ 50.216577] wlan: [5017: I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update[ 50.225684] wlan: [5017: I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case [ 50.234497] wlan: [5017: I:ANY] EXT NSS Supported[ 50.241816] wlan: [5017: I:ANY] OL Resmgr Init-ed[ 50.246684] wlan: [5017: I:ANY] acfg_attach: Offload using existing sock ffffffc03bcee800[ 50.251287] wlan: [5017: I:ANY] rate power table override is only supported for AR98XX[ 50.259450] wlan: [5017: I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1[ 50.267420] wlan: [5017: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 11[ 50.274120] wlan: [5017: I:ANY] [ 50.281763] wlan: [0: I:ANY] ol_ath_pdev_attach: Set global_ic[2] ..ptr:ffffffbffd356590[ 50.285055] wlan: [0: I:ANY] pdev(ffffffc037cfe188) Enabling DBDC Repeater 1 [ 50.293143] wlan: [0: I:ANY] pdev(ffffffc037cfe188) is_primary 0 [ 50.293207] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 50.306246] wlan: [5017: I:ANY] Pdev = 1 Number of peers = 529[ 50.315085] wlan: [5017: I:ANY] osif_wrap_attach:485 osif wrap attached[ 50.320128] wlan: [5017: I:ANY] osif_wrap_devt_init:446 osif wrap dev table init done[ 50.326638] wlan: [5017: I:ANY] Wrap Attached: Wrap_com =ffffffc03bcefc00 ic->ic_wrap_com=ffffffc03bcefc00 &wrap_com->wc_devt=ffffffc03bcefc00 [ 50.334639] wlan: [5017: I:ANY] __ol_ath_attach: needed_headroom reservation 60[ 50.347641] wlan: [5017: I:ANY] Enabled Fraglist bit for the radio wifi1 features 41 [ 50.355156] wlan: [5017: I:ANY] ol_ath_thermal_mitigation_attach: --[ 50.363031] wlan: [5017: I:ANY] ol_ath_ahb_probe num_radios=2, wifi_radios[0].sc = ffffffc032780880_radio_type = 2[ 50.369088] wlan: [5017: I:ANY] ol_ath_ahb_probe num_radios=2, wifi_radios[1].sc = ffffffc0327a0880_radio_type = 2[ 50.379293] wlan: [5017: I:ANY] ath_sysfs_diag_init: diag_fsattr [ 50.389954] ath_ol_pci: (Atheros/multi-bss)[ 50.435156] wlan: [5234: I:ANY] __sa_init_module No Direct-Attach chipsets found.[ 50.485069] Removing athdebug proc file[ 50.485101] ath_dev: driver unloaded[ 50.525035] wlan: [5238: I:ANY] 6ath_tx99: driver unloaded[ 50.574913] ath_rate_atheros: driver unloaded[ 50.614940] ath_hal: driver unloadedcat: can't open '1': No such file or directory[ 50.669701] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter[ 50.670171] wlan: [5248: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 13[ 50.675481] wlan: [5248: I:ANY] Enable ol_stats by default for Hawkeye[ 50.698596] wlan: [5257: I:ANY] set TXBF_SND_PERIOD: value 100 wmi_status 0[ 50.702357] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 50.703949] wlan: [0: I:ANY] Disconnect_timeout value entered:10 [ 50.712705] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 50.719520] wlan: [0: I:ANY] reconfiguration_timeout value entered:60 cat: can't open '/sys/class/net/ath1/address': No such file or directory[ 50.891928] wlan_vap_create : enter. devhandle=0x327a0880, opmode=IEEE80211_M_HOSTAP, flags=0x1[ 50.891970] wlan: [5326: I:ANY] ol_ath_vap_create: vdev id 0 [ 50.899544] wlan: [5326: I:ANY] nss-wifi:#0 VAP# vap ffffffc034080000 nss_if 32 [ 50.905412] wlan: [5326: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 1 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0 [ 50.912961] wlan: [5326: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x1a[ 50.935285] wlan: [5326: I:ANY] dp_lag_pdev_set_ap_vdev pdev(ffffffc037cfe188) ap_vdev ffffffc029b62c00 [ 50.942405] wlan: [5326: I:ANY] nss-wifi:#0 VAP# vdev ffffffc0295f9000 vap ffffffc034080000 osif ffffffc029650880 nss_if 32 [ 50.951895] wlan: [5326: I:ANY] update nss wifiol ctx in osdev[ 50.963087] wlan: [5326: I:ANY] NSS wifi offload VAP create IF 32 nss_id -1 [ 50.968705] wlan: [5326: I:ANY] ****NSS radio_if 31****[ 50.976028] wlan: [0: I:ANY] VDEV configuration success: 0[ 50.980864] wlan: [5326: I:ANY] vap create ffffffc029650880 : if_num 32 [ 50.986549] wlan_vap_create : exit. devhandle=0x327a0880, vap=0x34080000, opmode=IEEE80211_M_HOSTAP, flags=0x1.[ 50.987004] wlan: [0: I:ANY] Get MPSTA: vdev is NULL[ 51.003077] wlan: [5326: I:ANY] sa_api_init: Smart Antenna is not supported [ 51.008295] wlan: [5326: I:ANY] sa_api_init: Smart Antenna is not supported [ 51.015327] wlan: [5326: I:ANY] TX Checksum Bit: 1 SG Bit: 1 TSO Bit: 1 LRO Bit: 0[ 51.022345] wlan: [5326: I:ANY] WLAN-NSS: VAP NSS ops initialized [ 51.030116] wlan: [5326: I:ANY] ol_ath_update_phymode_caps: Error Mode 0 not 2G or 5G[ 51.036828] wlan: [5326: I:ANY] VAP device ath1 created osifp: (ffffffc029650880) os_if: (ffffffc034080000)[ 51.044186] wlan: [5326: I:ANY] 3VAP device ath1 created![ 51.055605] wlan: [5343: I:ANY] EXT NSS SupportedInvalid command : dni_vlan_prish: 192: unknown operand[ 51.099639] wlan: [5361: I:ANY] setting hifi mode 5[ 51.102813] WARNING: Fragmentation with HT mode NOT ALLOWED!!Error for wireless request "Set Fragmentation Threshold" (8B24) : SET failed on device ath1 ; Invalid argument.[ 51.117618] wlan: [5373: I:ANY] Setting Max Stations:256[ 51.122625] wlan: [5375: I:ANY] DES SSID SET=NETGEAR22 Interface doesn't accept private ioctl...stafwd (8BE0): Invali[ 51.132323] wlan: [5379: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3[ 51.137177] wlan: [5380: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3[ 51.149266] wlan: [5382: I:ANY] HE SU BFER already set with this value =1 [ 51.158793] wlan: [5383: I:ANY] HE SU BFEE already set with this value =0 [ 51.165486] wlan: [5384: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3[ 51.170978] wlan: [5384: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3[ 51.184837] wlan: [5386: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 0 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0 [ 51.193015] wlan: [5386: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x12[ 51.216750] wlan: [5387: I:ANY] HE MU BFEE only supported in STA mode [ 51.224428] wlan: [5388: I:ANY] HE DL MU OFDMA already set with this value =1 [ 51.231186] device ath1 entered promiscuous moded argumentInterface doesn't accept private ioctl...vhtsubfee (8BE0): Invalid argumentInterface doesn't accept private ioctl...vhtmubfee (8BE0): Invalid argumentInterface doesn't accept private ioctl...he_mubfee (8BE0): Invalid argumentsh: 0: unknown operandsh: 0: unknown operandsh: 0: unknown operandsh: ag: out of range[ 51.422446] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 [ 51.462663] DEVICE IS DOWN ifname=ath1[ 51.462700] DEVICE IS DOWN ifname=ath1[ 51.496182] wlan: [1703: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4 [ 51.496208] wlan: [1703: I:ANY] macaddr bc:a5:11:a7:ae:f6[ 51.522432] wlan: [1703: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff[ 51.522457] wlan: [1703: I:ANY] [ 51.528535] wlan: [1703: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000[ 51.531843] wlan: [1703: I:ANY] [ 51.542422] wlan: [1703: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel[ 51.545556] wlan: [1703: I:ANY] [ 51.556168] br0: port 6(ath1) entered forwarding state[ 51.557801] br0: port 6(ath1) entered forwarding state[ 51.562787] 8021q: adding VLAN 0 to HW filter on device ath1[ 51.567964] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes readyOK/sbin/wlan: eval: line 16: scan_interfaces: not found/sbin/wlan: eval: line 16: setup_interface: not found[ 51.654950] wlan: [5422: I:ANY] osif_vap_init: Scan in progress.. Cancelling it. vap: 0xffffffc034080000 [ 51.692501] wlan: [5422: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff[ 51.692531] wlan: [5422: I:ANY] [ 51.698775] wlan: [5422: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000[ 51.701920] wlan: [5422: I:ANY] [ 51.712728] wlan: [5422: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel[ 51.715638] wlan: [5422: I:ANY] [ 51.726718] wlan: [5433: I:ANY] osif_vap_init: Scan in progress.. Cancelling it. vap: 0xffffffc034080000 [ 51.752430] wlan: [5433: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff[ 51.752457] wlan: [5433: I:ANY] [ 51.758533] wlan: [5433: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000[ 51.761843] wlan: [5433: I:ANY] [ 51.772477] wlan: [5433: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel[ 51.775572] wlan: [5433: I:ANY] sh: 1: unknown operandsh: 0: unknown operandsh: out of range[ 51.835117] br0: port 6(ath1) entered disabled state[ 51.862455] wlan: [5456: I:ANY] osif_vap_init: 7701: chan: 0xffffffffffffffff[ 51.862485] wlan: [5456: I:ANY] [ 51.868562] wlan: [5456: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000[ 51.871871] wlan: [5456: I:ANY] [ 51.882478] wlan: [5456: I:ANY] osif_vap_init: 7740: started wlan_autoselect_find_infra_bss_channel[ 51.885581] wlan: [5456: I:ANY] [ 51.896072] br0: port 6(ath1) entered forwarding state[ 51.897830] br0: port 6(ath1) entered forwarding state[ 51.902792] 8021q: adding VLAN 0 to HW filter on device ath1[ 51.913854] wlan: [0: E:NSS] [nss-wifili]: Could not set astenty active for hw_idx = 2860qcawifi qcawificfg80211: enable radio wifi0[ 52.194862] wlan (5694): drop_caches: 3grep: /tmp/openvpn/client/data/openvpn_client.stat: No such file or directory[ 53.116433] ECM exit[ 53.238117] __mc_netlink_receive: Disable bridge snooping![ 53.310827] __mc_netlink_receive: Enable bridge snooping![ 53.322563] ECM exit completetime zone index is : 2chgrp: unknown group www-data[FW UPGRADE][2020-06-18 11:55:00]:[Daily Check FW]count time:0[ 53.740509] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null)[wlan]===time:Thu Jun 18 11:55:01 UTC 2020 command:wlan stainf[ 54.315459] wlan: [0: I:TIF] tgt_reg_chan_list_update_handler: 101: enter[ 54.321942] wlan: [6373: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 19[ 54.325273] wlan: [6373: I:ANY] [ 54.332859] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=58[ 54.335984] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=106[ 54.344085] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=122[ 54.352794] wlan: [6373: I:ANY] wlan_scan_update_channel_list: 1049: num_chan: 19[ 54.360585] wlan: [6373: I:ANY] [ 54.368455] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=58[ 54.371526] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=106[ 54.379686] wlan: [6373: I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 574: freq=122[ 54.387894] wlan: [4714: I:ANY] ol_acfg_handle_wifi_ioctl: req->cmd=74 not valid for radio interface, it's for VAPo============== [ 54.427617] wlan: [6398: I:ANY] set TXBF_SND_PERIOD: value 100 wmi_status 0[ 54.433047] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 54.433398] wlan: [0: E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed[ 54.458001] wlan: [0: I:ANY] Disconnect_timeout value entered:10 [ 54.459538] wlan: [0: I:ANY] reconfiguration_timeout value entered:60 [ 54.562810] wlan_vap_create : enter. devhandle=0x32780880, opmode=IEEE80211_M_HOSTAP, flags=0x1[ 54.562862] wlan: [6479: I:ANY] ol_ath_vap_create: vdev id 1 [ 54.570431] wlan: [6479: I:ANY] nss-wifi:#0 VAP# vap ffffffc035f48000 nss_if 33 [ 54.576388] wlan: [6479: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 1 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0 [ 54.583855] wlan: [6479: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x1a[ 54.606193] wlan: [6479: I:ANY] dp_lag_pdev_set_ap_vdev pdev(ffffffc036b2e188) ap_vdev ffffffc029b60400 [ 54.613343] wlan: [6479: I:ANY] nss-wifi:#0 VAP# vdev ffffffc0295fe000 vap ffffffc035f48000 osif ffffffc0296e3880 nss_if 33 [ 54.622769] wlan: [6479: I:ANY] update nss wifiol ctx in osdev[ 54.633965] wlan: [6479: I:ANY] NSS wifi offload VAP create IF 33 nss_id -1 [ 54.639587] wlan: [6479: I:ANY] ****NSS radio_if 30****[ 54.646834] wlan: [0: I:ANY] VDEV configuration success: 0[ 54.651756] wlan: [6479: I:ANY] vap create ffffffc0296e3880 : if_num 33 [ 54.657430] wlan_vap_create : exit. devhandle=0x32780880, vap=0x35f48000, opmode=IEEE80211_M_HOSTAP, flags=0x1.[ 54.657905] wlan: [0: I:ANY] Get MPSTA: vdev is NULL[ 54.673989] wlan: [6479: I:ANY] sa_api_init: Smart Antenna is not supported [ 54.679211] wlan: [6479: I:ANY] sa_api_init: Smart Antenna is not supported [ 54.686231] wlan: [6479: I:ANY] TX Checksum Bit: 1 SG Bit: 1 TSO Bit: 1 LRO Bit: 0[ 54.693242] wlan: [6479: I:ANY] WLAN-NSS: VAP NSS ops initialized [ 54.701024] wlan: [6479: I:ANY] ol_ath_update_phymode_caps: Error Mode 0 not 2G or 5G[ 54.707731] wlan: [6479: I:ANY] VAP device ath0 created osifp: (ffffffc0296e3880) os_if: (ffffffc035f48000)[ 54.715056] wlan: [6479: I:ANY] 3VAP device ath0 created![ 54.738698] wlan: [6485: I:ANY] EXT NSS Supported[ 54.780604] wlan: [6511: I:ANY] setting hifi mode 5[ 54.783987] WARNING: Fragmentation with HT mode NOT ALLOWED!![ 54.798543] wlan: [6524: I:ANY] Setting Max Stations:256[ 54.801798] wlan: [6526: I:ANY] DES SSID SET=NETGEAR22 [ 54.810825] wlan: [6530: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7[ 54.812791] wlan: [6531: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7[ 54.823826] wlan: [6533: I:ANY] HE SU BFER already set with this value =1 [ 54.833050] wlan: [6534: I:ANY] HE SU BFEE already set with this value =0 [ 54.839769] wlan: [6535: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7[ 54.845404] wlan: [6535: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7[ 54.859132] wlan: [6537: I:ANY] ol_ath_vap_set_param : Setting the following vdev params vap->iv_he_su_bfee: 0, vap->iv_he_su_bfer: 1 vap->iv_he_mu_bfee: 0, vap->iv_he_mu_bfer: 0 vap->iv_he_dl_muofdma: 1, vap->iv_he_ul_muofdma: 0 vap->iv_he_ul_mumimo: 0 [ 54.867340] wlan: [6537: I:ANY] ol_ath_vap_set_param : WMI: he_bf_cap = 0x12[ 54.891075] wlan: [6538: I:ANY] HE MU BFEE only supported in STA mode [ 54.898461] wlan: [6539: I:ANY] HE DL MU OFDMA already set with this value =1 [ 54.905484] device ath0 entered promiscuous mode[ 54.913866] wlan: [0: E:NSS] [nss-wifili]: Could not set astenty active for hw_idx = 2756[ 55.062442] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 [ 55.102586] DEVICE IS DOWN ifname=ath0[ 55.102623] DEVICE IS DOWN ifname=ath0[ 55.135933] wlan: [1703: I:ANY] Keyix=1 Keylen=16 Keyflags=3 Cipher=4 [ 55.135960] wlan: [1703: I:ANY] macaddr bc:a5:11:a7:ae:f8[ 55.162436] wlan: [1703: I:ANY] osif_vap_init: 7701: chan: 0xffffffc032781c10[ 55.162461] wlan: [1703: I:ANY] [ 55.168621] wlan: [0: I:ANY] OL vap start id: 1 +[ 55.171863] wlan: [0: I:ANY] OL vap_start -[ 55.483566] wlan: [0: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 7[ 55.483631] wlan: [0: I:ANY] Setting Rx Decap type to 2 (Ethernet)[ 55.493166] wlan: [0: I:ANY] Setting Tx Encap type to 2 (Ethernet)[ 55.499248] wlan: [0: E:FILS discovery] target_if_fd_reconfig: 157: FILS is not enabled[ 55.505396] wlan: [0: I:ANY] sa_api_init: Smart Antenna is not supported [ 55.532445] wlan: [1703: I:ANY] Mgmt Rate:6000(kbps) Rate Code:0x10000003[ 55.532845] br0: port 7(ath0) entered forwarding state[ 55.538203] br0: port 7(ath0) entered forwarding state[ 55.543429] 8021q: adding VLAN 0 to HW filter on device ath0[ 55.633151] wlan: [6616: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0 ratekbps=4803900 [wlan]=========time:Thu Jun 18 11:55:03 UTC 2020 wlan up end==================[ 56.367655] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)[ 56.762734] EXT4-fs (mtdblock37): mounted filesystem without journal. Opts: (null)[ 56.773592] __mc_netlink_receive: Disable bridge snooping![ 56.796733] __mc_netlink_receive: Enable bridge snooping![ 59.228099] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)Init wifison script to boot lbd/sbin/wifison.sh: line 2998: logd: not founduci: Entry not founduci: Entry not founduci: Entry not founduci: Entry not founduci: Entry not founduci: Entry not founduci: Entry not foundSave Data Success!, Parentid: 7191, parent process: (wifison.sh),presentid: 7409,present: (config) [ 60.208837] wlan: [7433: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0 ratekbps=4803900 lbd: starting daemon/etc/rc.common: line 1: __hyd_cfg_nl_append: not found/etc/rc.common: line 1: __hyd_cfg_add_str: not found/etc/rc.common: line 1: __hyd_cfg_add_str: not found[ 60.415738] wlan: [7461: I:ANY] [ath1]Band steering events being sent to PID:7461[ 60.415777] wlan: [7461: I:ANY] [ath0]Band steering events being sent to PID:74612048+0 records in2048+0 records out1048576 bytes (1.0MB) copied, 0.119904 seconds, 8.3MB/sca.crtcert.infoclient.crtclient.keydh1024.pemserver.crtserver.key/etc/rc.common: /etc/rc.d/S62funjsq: line 13: syntax error: unexpected "}"Starting Firewall...[ 60.803137] xt_CT: netfilter: NOTRACK target is deprecated, use CT instead or upgrade iptablesDone!time zone index is : 2POT is Running...[ 62.978514] __mc_netlink_receive: Enable bridge snooping!cat: can't open '/var/run/bond-mode': No such file or directorycat: can't open '/var/run/bond-mode_wan': No such file or directory[ 64.060518] __mc_netlink_receive: Enable bridge snooping![ 65.507443] wlan: [0: I:ANY] ieee80211_derive_chan : Overriding HE40 channel with HE20 channel[ 65.507502] wlan: [0: I:ANY] OL vap start id: 0 +[ 65.514967] wlan: [0: I:ANY] OL vap_start -[ 65.519726] wlan: [0: I:ANY] Mgmt Rate:1000(kbps) Rate Code:0x10000103[ 65.610861] wlan: [0: I:ANY] vht su bfee 0 vht mu bfee 0 vht su bfer 1 vht mu bfer 1 vht impl bf 0 vht sounding dim 3[ 65.610929] wlan: [0: I:ANY] Setting Rx Decap type to 2 (Ethernet)[ 65.620452] wlan: [0: I:ANY] Setting Tx Encap type to 2 (Ethernet)[ 65.626549] wlan: [0: E:FILS discovery] target_if_fd_reconfig: 157: FILS is not enabled[ 65.632695] wlan: [0: I:ANY] sa_api_init: Smart Antenna is not supported traffic_meter start : .$Shutting down igmpproxy: [ 67.409100] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 8412[ 67.436399] UBIFS (ubi0:6): recovery needed[ 67.616192] UBIFS (ubi0:6): recovery completed[ 67.616261] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "vol_armor"[ 67.619526] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes[ 67.627242] UBIFS (ubi0:6): FS size: 59551744 bytes (56 MiB, 469 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs)[ 67.637159] UBIFS (ubi0:6): reserved for root: 2812775 bytes (2746 KiB)[ 67.647438] UBIFS (ubi0:6): media format: w4/r0 (latest is w4/r0), UUID A31186D7-8C65-45A8-8947-23D401BBA23B, small LPT modelchown: unknown user/group root:rootsed: /opt/bitdefender/etc/patch.server: No such file or directoryChanged config file to use production serverchown: unknown user/group root:rootSave Data Success!, Parentid: 8357, parent process: (S94armor_init),presentid: 8422,present: (config) [ 68.009966] guster accel_cb registered; mark shift 20Save Data reject(no change)!, Parentid: 8431, parent process: (S95done),presentid: 8470,present: (config) check mouted USB partions...****************Start of ping-netgear********************DUT_boot_up_done!!!!!!!!!! SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done. SSDK Init OK!operation done.control-firmware will be Running when Internet status is UP !!!Thermal Init Set ALL wifi 0Thermal Init Set ALL wifi 0ln: /dev/caldata: File exists/etc/rc.common: line 153: /etc/init.d/kcode: not foundcat: can't open '/tmp/debug_store_locate': No such file or directorycat: can't open '/tmp/wanlan_capture': No such file or directory2+0 records in2+0 records out262144 bytes (256.0KB) copied, 0.062853 seconds, 4.0MB/s4096+0 records in4096+0 records out2097152 bytes (2.0MB) copied, 0.653297 seconds, 3.1MB/star: Skipping to next header[ 69.567433] XHTTP netlink: remove OK.[ 69.644426] XHTTP netlink: create netlink OK.tar: Child returned status 1tar: Error is not recoverable: exiting nowSave Data Success!, Parentid: 8773, parent process: (S99aws),presentid: 8897,present: (config) killall: aws-iot: no process killedrm: can't remove '/var/run/aws_iot.pid': No such file or directorySave Data reject(no change)!, Parentid: 8773, parent process: (S99aws),presentid: 8965,present: (config) Save Data reject(no change)!, Parentid: 1, parent process: (procd),presentid: 8970,present: (aws-iot) Save Data reject(no change)!, Parentid: 8958, parent process: (detectSATA),presentid: 9017,present: (config) bdbrokerd is up, call ash startSave Data Success!, Parentid: 1, parent process: (procd),presentid: 8980,present: (icqm) Save Data reject(no change)!, Parentid: 8958, parent process: (detectSATA),presentid: 9130,present: (config) [ 71.585377] wlan: [9377: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 23 NSS = 4 SGI =0 ratekbps=573500 [ 71.588161] wlan: [9377: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0 ratekbps=4803900 [ 71.596697] wlan: [9382: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 23 NSS = 4 SGI =0 ratekbps=573500 [ 71.605617] wlan: [9382: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0 ratekbps=4803900 [ 71.624570] wlan: [9391: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 23 NSS = 4 SGI =0 ratekbps=573500 [ 71.624922] wlan: [9391: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0 ratekbps=4803900 ########### [ Thu, 18 Jun 2020 11:55:18 +0000 ] #############[[ 71.647738] wlan: [9402: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000[ 71.649415] wlan: [9402: I:ANY] VAP: ath1]########### [ Thu, 18 Jun 2020 11:55:19 +0000 ] #############[VAP: ath0][ 72.678737] wlan: [9464: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc035f48000[ 72.678774] wlan: [9464: I:ANY] [ 75.570029] wlan: [9610: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 23 NSS = 4 SGI =0 ratekbps=573500 [ 75.570270] wlan: [9610: I:ANY] ol_ath_node_get_maxphyrate:1517 Phymode = 30 NSS = 8 SGI =0 ratekbps=4803900 [ 75.642475] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc034080000[ 75.642511] wlan: [0: I:ANY] [ 75.651808] wlan: [0: I:ANY] ieee80211_autoselect_infra_bss_channel: 4031: ACS started on vap: 0xffffffc035f48000[ 75.654692] wlan: [0: I:ANY]
Atomic Mail Sender 5.15 Full Crack Softwarel
DOWNLOAD: https://tlniurl.com/2vJeDO
2ff7e9595c
Comments